Porous fibrous ZrO2-mullite ceramics prepared via tert-butyl alcohol-based gel-casting

Mullite fiber was used to fabricate ZrO₂-mullite based porous ceramic via tert-butyl alcohol (TBA)-based gel-casting process using zirconite and bauxite as raw materials. Phase compositions, microstructure, pore size distribution, linear shrinkage, bulk density, apparent porosity, thermal conductivity, and compressive strength were analyzed to investigate influences of mullite fiber content and added Y₂O₃ on prepared porous ceramics. Results show that bird nest-like three-dimensional fibrous reticular skeleton structure was constructed with mullite fibers that evenly enwrapped rod-like mullite and ZrO₂ grains. Prepared porous fibrous ZrO₂-mullite ceramics had narrow pore size distribution that consisted of mullite and m-ZrO₂. With an increase in mullite fiber content, linear shrinkage and bulk density decreased, apparent porosity increased, and relatively good thermal conductivity was obtained. In addition, added Y₂O₃ reacted with Al₂O₃ and SiO₂ to form Y-Al-Si-O glass phase, which promoted sintering and densification of the ceramic, thus improving its compressive strength.