| 油管内玻璃钢涂层去除机械加工的变形分析 |
| |
| 引用本文： | 段铁群,李冬华.油管内玻璃钢涂层去除机械加工的变形分析[J].哈尔滨理工大学学报,2003,8(3):33-36. |
| |
| 作者姓名： | 段铁群 李冬华 |
| |
| 作者单位： | 1. 哈尔滨理工大学,机械动力工程学院,黑龙江,哈尔滨,150080
2. 哈尔滨理工大学,应用科学学院,黑龙江,哈尔滨,150080 |
| |
| 摘 要： | 针对油管内玻璃钢涂层的浮动切削去除工艺方法，根据其拉杆和切削头的工作状态，建立了力学模型，并进行了静态和动态计算．对其参数结果分析表明，适当成小刀具组件质量或提高弹簧刚度可以有效提高系统的切削性能，为切削工艺的改进提供了依据．
|
| 关 键 词： | 输油管路 内玻璃钢涂层 浮动切削去除工艺 拉杆 静态变形 稳态振动方程 固有频率 激振响应 刀具 稳态响应 工作原理 |
| 文章编号： | 1007-2683(2003)03-0033-04 |
| 修稿时间： | 2002年12月12 |
Deformation Analysis of Mechanical Removing Glass Fibre Reinfirced Plastic Coat Inside Oil Pipes |
| |
| DUAN Tie-gun,LI Dong-hua.Deformation Analysis of Mechanical Removing Glass Fibre Reinfirced Plastic Coat Inside Oil Pipes[J].Journal of Harbin University of Science and Technology,2003,8(3):33-36. |
| |
| Authors: | DUAN Tie-gun LI Dong-hua |
| |
| Abstract: | The mechanical model is built. It is for the float cutting removal method of the glass fibre reinforced plastic coat inside oil pipes, and according to the operating conditions of the drag rods and cutting head. The static and dynamic calculation are made. According to the analysis of parameters results, it can be shown that properly decreasing the mass of the tool set or increasing the spring rigidity may promote the cutting efficiency of the system. So it establishes the theory foundation for the improvement of cutting process. |
| |
| Keywords: | float cutting deform analysis response |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
