| 高速剪切设备的概念设计 |
| |
| 引用本文： | 剡昌锋,李有堂,芮执元,安宗文.高速剪切设备的概念设计[J].机床与液压,2004(8):112-113. |
| |
| 作者姓名： | 剡昌锋 李有堂 芮执元 安宗文 |
| |
| 作者单位： | 兰州理工大学机电工程学院,甘肃兰州,730050 |
| |
| 摘 要： | 利用概念设计的原理和方法，形成了用于精密下料的高速剪切设备的结构方案，基于SolidWorks进行三维结构设计，并用有限元对主要部件进行分析，得到了比较满意的结果。
|
| 关 键 词： | 高速 剪切设备 概念设计 |
| 文章编号： | 1001-3881(2004)8-112-2 |
| 修稿时间： | 2003年7月7日 |
Concept Design of the High Speed Shearing Equipment |
| |
| YAN Chang-feng,LI You-tang,Rui Zhi-yuan,An Zong-wen.Concept Design of the High Speed Shearing Equipment[J].Machine Tool & Hydraulics,2004(8):112-113. |
| |
| Authors: | YAN Chang-feng LI You-tang Rui Zhi-yuan An Zong-wen |
| |
| Abstract: | Based on the principle and method of concept design,the sketch of the high speed shearing equipment for cutting the precise section was formed.Then the 3D structural design was made in SolidWorks,and the main parts were analyzed in finite element,the satisfying result was obtained. |
| |
| Keywords: | High speed Shearing equipment Concept design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
