首页 | 本学科首页   官方微博 | 高级检索  
     

塑钢纤维掺量、长径比对混凝土力学特性影响
引用本文:白春,刘书贤,麻凤海,王俊美,赵娟,姜景原.塑钢纤维掺量、长径比对混凝土力学特性影响[J].非金属矿,2019(1):33-36.
作者姓名:白春  刘书贤  麻凤海  王俊美  赵娟  姜景原
作者单位:辽宁工程技术大学土木工程学院;大连大学建筑工程学院;商丘学院建筑与土木工程学院
基金项目:国家自然科学基金(51474045);河南省高等学校重点科研项目(18A560019);河南省大学生创新训练项目(S201814003003)
摘    要:通过研究3种掺量、4种长径比的塑钢纤维,对橡胶混凝土的塌落度、抗压强度、劈裂抗拉强度及其应力-应变曲线影响,得到各因素对橡胶混凝土塌落度、强度及应力-应变曲线影响规律。试验结果表明:塑钢纤维掺量增加、长径比增大,混凝土塌落度减小,黏聚性增加,应力应变曲线峰值应力提高,曲线下降段变缓,延性、韧性、阻裂性显著提高;选用最佳长径比20、适宜掺量6 kg/m3,抗压强度与劈拉强度较基准混凝土分别提高36.7%和69.7%,试件破坏时完整性较好。

关 键 词:塑钢纤维  掺量  长径比  应力-应变

The Influence of Fiber Admixture and Long Diameter Ratio on Mechanical Properties of Concrete
Bai Chun,Liu Shuxian,Ma Fenghai,Wang Junmei,Zhao Juan,Jiang Jingyuan.The Influence of Fiber Admixture and Long Diameter Ratio on Mechanical Properties of Concrete[J].Non-metallic Mines,2019(1):33-36.
Authors:Bai Chun  Liu Shuxian  Ma Fenghai  Wang Junmei  Zhao Juan  Jiang Jingyuan
Affiliation:(College of Civil Engineering, Liaoning Technical University, Fuxin, Liaoning 123000;College of Architecture and Civil Engineering, Dalian University, Dalian, Liaoning 116622;College of Architecture and Civil Engineering, Shangqiu University, Shangqiu, Henan 476000)
Abstract:By studying the influence of plastic steel fibers with three dosage and four length-diameter ratios on the collapse degree, compressive strength, splitting tensile strength and stress-strain curve of rubber concrete, the influence law of various factors on the collapse degree, strength and stress-strain curve of rubber concrete was obtained. Experimental results showed that the proportion of plastic steel fiber increased, the length-diameter ratio increased, the collapse degree of concrete decreased, the cohesion increased, the peak stress of the stress-strain curve increased, the decline section of the curve slowed down, and the ductility, toughness and crack resistance increased significantly. Select the optimum length-diameter ratio of 20 and the appropriate dosage of 6 kg/m^3. The compressive strength and split tensile strength were improved by 36.7% and 69.7%, respectively, compared with the benchmark concrete. The specimen has good integrity when it is damaged.
Keywords:plastic steel fiber  dosage  length to diameter ratio  stress-strain
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号