| Pro/E在汽车扣手盖注塑模设计中的应用 |
| |
| 引用本文： | 赵龙志,赵明娟,杨自成,张尚兵. Pro/E在汽车扣手盖注塑模设计中的应用[J]. 中国塑料, 2009, 23(1): 105-109. DOI: 10.19491/j.issn.1001-9278.2009.01.023 |
| |
| 作者姓名： | 赵龙志 赵明娟 杨自成 张尚兵 |
| |
| 作者单位： | 1. 华东交通大学，载运工具与装备省部共建教育部重点实验室，江西 南昌 330013；2.辽阳金兴汽车内饰集团公司，辽宁 辽阳 111000 |
| |
| 摘 要： | 介绍了Pro/E和Moldflow软件在汽车内饰件扣手盖注塑模具设计中的应用。采用Pro/E软件建立了产品模型，创建模具体积块，建立了分型面，并对模具进行了铸模模拟，确保了模具运行可靠。最后基于模具体积块，利用EMX4.1进行了模架调用与装配。结果表明，采用三维CAD/CAE技术能直接进行产品到模具体积块的设计，缩短了产品的开发周期，大大降低了模具的设计成本。
|
| 关 键 词： | 扣手盖 Pro/E 分型面 模架 Moldflow |
| 收稿时间： | 2008-10-07 |
Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid |
| |
| ZHAO Long-zhi,ZHAO Ming-juan,YANG Zi-cheng,ZHANG Shang-bing. Application of CAD/CAE in Design of Plastic Injection Moulding for Button Lid[J]. China Plastics, 2009, 23(1): 105-109. DOI: 10.19491/j.issn.1001-9278.2009.01.023 |
| |
| Authors: | ZHAO Long-zhi ZHAO Ming-juan YANG Zi-cheng ZHANG Shang-bing |
| |
| Affiliation: | 1.Key Laboratory of Conveyance and Equipment of Ministry of Education, East China Jiaotong University, Nanchang 330013, China; 2.Liaoyang Jinxing Automobile Inner Decoration Group Co., Ltd, Liaoyang111000, China |
| |
| Abstract: | Application of Pro/E and Moldflow software in the design of injection mould for the button lid of the automobile inner decoration was introduced in this paper. Using Pro/E software, a product model was formulated, the block configuration and parting surface were determined, which ensured the mould working reliably. By aid of EMX module, the mould frame was designed transferable and adjustable. Based on CAE/CAD technology, the design of product and mould could carried out directly, which decreased the production cycle, improved the quality of the injection mould. |
| |
| Keywords: | button lid Pro/E parting surface mould frame Moldflow |
|
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
