首页 | 本学科首页   官方微博 | 高级检索  
     

SD3 离子交换树脂分离提取ATP 的研究
引用本文:乔德阳,甘 聃. SD3 离子交换树脂分离提取ATP 的研究[J]. 食品科学, 2009, 30(6): 128-131. DOI: 10.7506/spkx1002-6630-200906026
作者姓名:乔德阳  甘 聃
作者单位:徐州工业职业技术学院化学工程系
摘    要:通过对SD3 离子交换树脂对ATP 动态吸附、洗杂和洗脱条件的考察,确定最适吸附条件为:样品溶液H 2.0,浓度8.25g/L,离子交换柱的高径比为10(装柱湿树脂80g),流速1.0ml/min;最优洗杂液为pH1.5 HC1+ 0.05mol/L NaCl 的溶液;ATP 的最优洗脱液为pH12.0 NaOH+0.1mol/L NaCl 溶液,优洗脱速度为0.5ml/min。

关 键 词:三磷酸腺苷(ATP)  离子交换树脂  分离  
收稿时间:2008-12-30

Separation of ATP from Waste Beer Yeast Hydrolysate by SD3 Ion Exchange Resin
QIAO De-yang,GAN Dan. Separation of ATP from Waste Beer Yeast Hydrolysate by SD3 Ion Exchange Resin[J]. Food Science, 2009, 30(6): 128-131. DOI: 10.7506/spkx1002-6630-200906026
Authors:QIAO De-yang  GAN Dan
Affiliation:(Department of Chemical Engineering, Xuzhou College of Industrial Technology, Xuzhou 221140, China)
Abstract:The dynamic adsorption and desorption of SD3 ion exchange resin to ATP were studied. The results showed that the optimum adsorption conditions of ATP are as follows: pH of waste beer yeast hydrolysate 2.0, its concentration 1.0 mg/ml, its flow rate 8.25 g/L and diameter to height ratio of column 10 (80 g of wet resin filled into the column). The optimum eluent for removing impurity is HCl solution at pH 1.5 containing 0.05 mol/L NaCl. And the optimum elution conditions of ATP are as follows: taking NaOH solution at pH 12.0 containing 0.1 mol/L NaCl as eluent and its flow rate 0.5 ml/min.
Keywords:ATP  ion exchange resin  separation  
点击此处可从《食品科学》浏览原始摘要信息
点击此处可从《食品科学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号