| 小球团烧结最佳工艺参数的选取 |
| |
| 引用本文： | 臧疆文 王梅菊. 小球团烧结最佳工艺参数的选取[J]. 烧结球团, 1999, 24(4): 14-18 |
| |
| 作者姓名： | 臧疆文 王梅菊 |
| |
| 作者单位： | 新疆钢铁研究所 |
| |
| 摘 要： | 采用Ｄｎ－最优设计得到了烧结负压、焦粉配比、料层高讧民诸指标的回归方程，并通过解优化模型，求出了三因子的最佳范围。
|
| 关 键 词： | 小球团烧结 工艺参数 烧结 |
SELECTION OF OPTIMUM PARAMETERS FOR MPS PROCESS |
| |
| Zang Jiangwen et al.. SELECTION OF OPTIMUM PARAMETERS FOR MPS PROCESS[J]. Sintering and Pelletizing, 1999, 24(4): 14-18 |
| |
| Authors: | Zang Jiangwen et al. |
| |
| Affiliation: | Zang Jiangwen et al. |
| |
| Abstract: | The regression equations between sintering suction,coke breeze proportioning rate,bed hight and various sintering indices were obtained by Dn-optimization design.Through redusing the optimum model, the optimum rangs of these three factors were determined. |
| |
| Keywords: | MPS process operating parameters |
| 本文献已被 CNKI 维普 等数据库收录！ |
