首页 | 本学科首页   官方微博 | 高级检索  
     

刚性聚合物改性PVC/CPE/CaCO_3共混体的研究
引用本文:杨文君,吴其晔,李才峰,杜华. 刚性聚合物改性PVC/CPE/CaCO_3共混体的研究[J]. 塑料工业, 1993, 0(1)
作者姓名:杨文君  吴其晔  李才峰  杜华
作者单位:青岛化工学院高材系 266042(杨文君,吴其晔,李才峰),青岛化工学院高材系 266042(杜华)
摘    要:本文研究刚性聚合物(PS、PMMA)对CaCO_2填充的PVC/CPE共混体力学性能和流变性能的影响。结果表明,刚性聚合物的填入提高了共混体的冲击强度,其中,对PVC/CPE/CaCO_3=100/15/10体系的增韧效果较好。PMMA使共混体的拉伸强度有所提高而PS使共混体拉伸强度下降。流变性的测定显示,Ca-CO_2使共混体的表观粘度和粘流活化能增加,牛顿的流动性增强,而在PVC/CPE/CaCO_3共混体中加入4.5份PS能明显降低共混体的表观粘度和粘流活化能,牛顿的流动性降低,但仍有良好的挤出物外观和较低的挤出膨胀率。

关 键 词:聚氯乙烯  氯化聚乙烯  刚性聚合物增韧  流变性

A Study of the Modification of PVC/CPE/CaCO_3 Blend by Rigid Polymer
Yang Wenjun Wu Qiye Li Caifeng Du Hua. A Study of the Modification of PVC/CPE/CaCO_3 Blend by Rigid Polymer[J]. China Plastics Industry, 1993, 0(1)
Authors:Yang Wenjun Wu Qiye Li Caifeng Du Hua
Abstract:The effect of rigid polymer (PS,PMMA) on the mchanical properties and rheological behavior of PVC/CPE blend filled with CaCO_3 were studied. The results showed the impact strength of the blend was increased by filling rigid polymer, the toughening effect was good when the blending ratio of PVC/CPE/CaCO_3 was 100/15/10. The tensile strength of the blend was increased by PMMA, but decreased by PS. The determination of rheological property showed the apparent viscosity,adhesive fluid activition and Newtonian fluidity were increased and improved by CaCO_3; when 4.5 parts of PS were added to PVC/CPE/CaCO_3 blend, the apparent viscosity, adhesive fluid activition and Nwetonian fluidity were decreased obviously, but the extrudates would still have a good appearance and low extrusion expansion ratio.
Keywords:PVC CPE Rigid Polymer Toughening Rheological Property  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号