首页 | 本学科首页   官方微博 | 高级检索  
     

基于考虑含气量变化浆体水击模型的复合管道水击数值计算
引用本文:周云龙,段晓宁,陈晓波,洪文鹏,孙斌.基于考虑含气量变化浆体水击模型的复合管道水击数值计算[J].水动力学研究与进展(A辑),2006,21(1):107-112.
作者姓名:周云龙  段晓宁  陈晓波  洪文鹏  孙斌
作者单位:1. 东北电力学院,吉林,132012
2. 中国中轻国际工程有限公司,北京,100026
摘    要:作者在提出了考虑含气量变化的同液两相流浆体水击基本方程的基础上,建立了考虑含气量变化的浆体水击模型。运用该模型对某电厂除灰系统管道进行了水击数值计算,根据计算结果提出了合理的建议,该建议已被采纳和应用。同时将计算结果与原有清水水击模型和浆体水击模型的计算结果进行比较,结果表明:该水击计算模型在进行同液两相流水击计算时精度高,可用于工程计算。

关 键 词:固液两相流  水击  数值计算
文章编号:1000-4874(2006)01-0107-06
收稿时间:2005-06-08
修稿时间:2005-06-082005-08-05

Numerical calculation of the slurry water hammer in the complex pipe based on considering air capacity change
ZHOU Yun-long,DUAN Xiao-ning,CHEN Xiao-bo,Hong Wen-peng,SUN Bin.Numerical calculation of the slurry water hammer in the complex pipe based on considering air capacity change[J].Journal of Hydrodynamics,2006,21(1):107-112.
Authors:ZHOU Yun-long  DUAN Xiao-ning  CHEN Xiao-bo  Hong Wen-peng  SUN Bin
Affiliation:1. Northeast China Institute of Electric Power Engineering, Jilin 132012, China; 2. China BCEL International Engineering Co. ,Ltd, Beijing 100026, China
Abstract:Based on the basic equations of slurry water hammer of liquid-solid two-phase flow cons dering air capacity change proposed by the author, the mathematical model for the pseudo-homogeneous solid-liquid two-phase flow water hammer considering air capacity was developed. Using the improved model the calculation of the slurry water hammer in the complex pipe was done for a steam power plant. On the basis of the calculation results the reasonable advice was put forward. The advice has been adopted and applied. Compared with the results of the past models, the improved model is more precise and can be used in the engineering calculation.
Keywords:solid-liquid two-phase flow  water hammer  numerical calculation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号