| 内壁激冷气缸套的组织研究 |
| |
| 引用本文： | 阎承康,高伟.内壁激冷气缸套的组织研究[J].特种铸造及有色合金,1997(3):27-29. |
| |
| 作者姓名： | 阎承康 高伟 |
| |
| 作者单位： | 大连铁道学院(阎承康)，丹东５１８内燃机配件总厂(高伟) |
| |
| 摘 要： | 离心铸造气缸套采用内壁激冷新方法，可细化气缸套的内层组织：使硬质相的网孔直径从３级提高到１～２级，石墨片长度从４级提高到６级。实践证明，这种方法不会出现中间夹杂层现象。
|
| 关 键 词： | 离心铸造 气缸套 内壁激冷 中间夹杂层 硬质相的网孔直径 石墨片长度 |
Microstructure of the Cylinder Sleeve by Intensive Internal Chilling Treatment |
| |
| Yan Chengkang.Microstructure of the Cylinder Sleeve by Intensive Internal Chilling Treatment[J].Special Casting & Nonferrous Alloys,1997(3):27-29. |
| |
| Authors: | Yan Chengkang |
| |
| Affiliation: | Yan Chengkang (Dalian Railway Institute) Gao Wei (Dandong 518 Internal Combustion Engine Spare Parts Company) |
| |
| Abstract: | The internal microstructure of centrifuge casting cylinder sleeve has been improved by using the new internal chilling method. It is revealed that inner structure is fined, mesh diameters of hard phases are heightened from grade 3 to grade 1 or 2, and the length of flake graphite is also heightened from grade 4 to grade 6. In addition, central inclusion layer can be eliminated by using this method. |
| |
| Keywords: | Centrifuge Casting Cylinder Sleeve Internal Chilling Central Inclusion Layer Mesh Diameter of Hard Phase Length of Flake Graphite |
| 本文献已被 CNKI 维普 等数据库收录！ |
