首页 | 本学科首页   官方微博 | 高级检索  
     

同轴对转行星齿轮传动系统动态特性分析
引用本文:石万凯,刘 敬,龚建春.同轴对转行星齿轮传动系统动态特性分析[J].振动与冲击,2014,33(7):99-104.
作者姓名:石万凯  刘 敬  龚建春
作者单位:1.重庆大学 机械传动国家重点实验室,重庆 400044; 2.攀枝花学院 机电工程学院,攀枝花 617000
基金项目:国家自然科学基金(51075408)
摘    要:本文以同轴对转行星齿轮传动系统为研究对象,基于齿轮系统动力学和Lagrange方程,采用集中参数法建立了同轴对转系统的耦合动力学模型,模型中考虑了轮系的支撑刚度、弹性耦合和功率流向。在各个齿轮副的偏心误差、齿频误差和时变啮合刚度共同作用下,用数值分析方法得到了同轴对转系统的位移响应和速度响应等时域动态特性,并对比了定轴轮系与差动轮系的载荷分配,为同轴对转传动系统的动态性能优化与振动噪声研究提供了依据。

关 键 词:同轴对转  行星传动  齿轮动力学  动态特性  
收稿时间:2013-1-10
修稿时间:2013-5-15

Dynamic characteristics analysis of co-axial counter-rotatingepicyclic transmission
Shi Wankai,Liu Jing,Gong Jianchun.Dynamic characteristics analysis of co-axial counter-rotatingepicyclic transmission[J].Journal of Vibration and Shock,2014,33(7):99-104.
Authors:Shi Wankai  Liu Jing  Gong Jianchun
Affiliation:1.The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, 400044;2.School of Mechanical & Electronical Engineering, Panzhihua University, Panzhihua, 617000
Abstract:Based on the method of gear system dynamics and Lagrange equation, a coupling dynamic model of the Co-axial Counter-rotating Epicyclic Transmissions(CCET) is built by lumped-parameter method, and the support stiffness, elastic coupling and power flow of the gear train is considered in the model. Under the action of the gear pair run-out error, meshing-frequency error and time-varying mesh stiffness together, time-domain dynamic characteristics about displacement response and speed response are achieved by numerical analysis method, and the load sharing is compared between ordinary gear train and differential gear train, which provides the basis for dynamic performance optimization and noise and vibration study of CCET.
Keywords:co-axial counter-rotatingplanetary transmissiongear dynamicsdynamic characteristic
本文献已被 CNKI 等数据库收录!
点击此处可从《振动与冲击》浏览原始摘要信息
点击此处可从《振动与冲击》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号