首页 | 本学科首页   官方微博 | 高级检索  
     

空气源热泵热水机组压缩机密封结构设计
引用本文:周到,田旭东,钟瑜,王磊. 空气源热泵热水机组压缩机密封结构设计[J]. 石油化工高等学校学报, 2009, 22(2): 52-55
作者姓名:周到  田旭东  钟瑜  王磊
作者单位:合肥通用机械研究院,安徽合肥230031
基金项目:国家高技术研究发展计划(863计划) 
摘    要:利用大变形、接触的非线性有限元理论建立了空气源热泵热水机组压缩机密封结构的二维轴对称模型,据此对影响密封性能的各结构参数进行了分析,讨论了上下法兰张开间隙、密封槽槽口倒角半径、密封槽深、密封槽宽等典型参数的影响。结果表明,上下法兰张开间隙对最大接触压应力和剪应力的影响较大,而密封槽槽口处倒角半径对剪切应力影响不大,密封槽深、密封沟槽宽度对密封面最大接触压力的影响较显著。

关 键 词:O 形密封圈    接触问题    密封性能    非线性有限元    热泵热水机组  
收稿时间:2008-11-21

Design of Seal Structure in Compressor for Air Source Heat Pump Heat Unit
ZHOU Dao,TIAN Xu-dong,ZHONG Yu,WANG Lei. Design of Seal Structure in Compressor for Air Source Heat Pump Heat Unit[J]. Journal of Petrochemical Universities, 2009, 22(2): 52-55
Authors:ZHOU Dao  TIAN Xu-dong  ZHONG Yu  WANG Lei
Affiliation:( Hefei General Machinery Research Institute, Hefei Anhui 230031, P. R. China)
Abstract:2D axisymmetric model of seal structure in compressor for air source heat pump heat unit was established by using nonlinearity finite element theory of large deformation and contact problem. Some typical parameters of the seal structure which might have the impact on the sealing performance, such as gap's dimension between flanges, chamfer radius of the groove, groove depth and groove width, were analyzed. It is show that the gap between flanges influences the maximum contact pressure and shear stress are very much, groove depth and groove width have a remarkable influence on the maximum contact pressure and chamfer radius of the groove has a little impact on shear stress.
Keywords:O--rings Contact problem  Seal performance  Non--linear FEM  Heat pump heat unit
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《石油化工高等学校学报》浏览原始摘要信息
点击此处可从《石油化工高等学校学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号