| 混合气体保护背面强制成形的焊接工艺研究 |
| |
| 引用本文： | 曾平. 混合气体保护背面强制成形的焊接工艺研究[J]. 热加工工艺, 2006, 0(5) |
| |
| 作者姓名： | 曾平 |
| |
| 作者单位： | 武汉船舶职业技术学院 湖北武汉430050 |
| |
| 摘 要： | 通过对陶瓷衬垫药芯焊丝混合气体保护背面强制成形的焊接工艺试验,分析了主要规范参数和工艺因素对背面成形的影响。结果表明,采用合理的焊接工艺能保证背面焊缝焊接质量的可靠性。
|
| 关 键 词： | 混合气体保护 药芯焊丝 单面焊 陶质衬垫 |
Research on Welding Technology with Mixed Gas Shielding in Rear Forcible Figuration of One Side Welding |
| |
| ZENG Ping. Research on Welding Technology with Mixed Gas Shielding in Rear Forcible Figuration of One Side Welding[J]. Hot Working Technology, 2006, 0(5) |
| |
| Authors: | ZENG Ping |
| |
| Abstract: | Through the welding technology experiment about rear forcible figuration with ceramic backing,lux-cored wire,and mixed gas shielding,the influences of main normative parameters and technical factors on rear figuration were analyzed. The results show that with the reasonable technique, the reliability of welding quality of rear welding can be ensured. |
| |
| Keywords: | mixed gas shielding lux-cored wire one side welding ceramic backing |
| 本文献已被 CNKI 等数据库收录！ |
|
