| 偏曲轴少齿差行星减速器箱体的有限元分析 |
| |
| 引用本文： | 戴红娟,周红良,刘松. 偏曲轴少齿差行星减速器箱体的有限元分析[J]. 煤矿机械, 2010, 31(2) |
| |
| 作者姓名： | 戴红娟 周红良 刘松 |
| |
| 作者单位： | 1. 淮海工学院机械工程学院,江苏,连云港,222005
2. 连云港正大饲料有限公司,江苏连云港,222042 |
| |
| 基金项目： | 淮海工学院自然科学基金资助项目(Z2006024) |
| |
| 摘 要： | 以偏曲轴少齿差行星减速器为研究对象,介绍了它的结构和传动原理。采用Pro/E三维造型技术生成实体模型,完成了减速器的整机装配。将箱体模型导入到ANSYS软件中进行有限元静应力分析。结果表明:减速器箱体壁厚为20 mm时最大应力值为15.572 MPa,远小于材料的许用应力60 MPa,取厚度为10 mm仍然满足强度要求。对偏曲轴少齿差行星减速器结构的优化设计有指导作用。
|
| 关 键 词： | 偏曲轴 少齿差 行星齿轮 减速器箱体 静力分析 |
Finite Element Analysis of Eccentric Crankshaft Less Tooth Difference Planetary Gears Reducer |
| |
| DAI Hong-juan,ZHOU Hong-liang,LIU Song. Finite Element Analysis of Eccentric Crankshaft Less Tooth Difference Planetary Gears Reducer[J]. Coal Mine Machinery, 2010, 31(2) |
| |
| Authors: | DAI Hong-juan ZHOU Hong-liang LIU Song |
| |
| Affiliation: | 1.Department of Mechanical Engineering/a>;Huaihai Institute of Technology/a>;Lianyungang 222005/a>;China/a>;2.Lianyungang China Tai Feed Co./a>;Ltd./a>;Lianyungang 222042/a>;China |
| |
| Abstract: | The structure of the eccentric crankshaft less tooth difference planetary gears reducer and its principle of transmission were presented.Three-dimensional Pro/E entity models of various parts of the reducer are used to finish the model assembly of the reducer.The box model is leaded to ANSYS software and static stress analysis is got.The results show that when thickness of reducer box is 20 mm,that maximum stress is 15.572MPa which is much less than allowable stress 60MPa.When its thickness is 10mm,strength... |
| |
| Keywords: | eccentric crankshaft less tooth difference planetary gears reducer box static analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
