| 可重构制造系统的重构成本研究 |
| |
| 引用本文： | 林亚福,杨将新,楼洪梁,吴昭同. 可重构制造系统的重构成本研究[J]. 组合机床与自动化加工技术, 2005, 0(9): 1-4 |
| |
| 作者姓名： | 林亚福 杨将新 楼洪梁 吴昭同 |
| |
| 作者单位： | 浙江大学,现代制造工程研究所,杭州,310027 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 文章根据工位操作表的特性,提出了以工序包容度作为重构单元的划分准则.分析了组态与重构单元的组成关系;把研究组态之间的重构转化成为研究重构单元之间的重构,研究重构单元之间的重构流程,并描述其计算机实现的流程.在分析重构单元之间重构策略的基础上,建立组态之间因重构而产生的重构成本的数学模型.最后,以实例验证文中建立的模型及所提出的策略的有效性.
|
| 关 键 词： | 可重构制造系统 重构单元 重构成本 |
| 文章编号： | 1001-2265(2005)09-0001-04 |
| 收稿时间： | 2005-03-01 |
| 修稿时间： | 2005-03-01 |
Study on the Reconfiguration Cost of Reconfigurable Manufacturing Systems |
| |
| LIN Ya-fu,YANG Jiang-xin,LOU Hong-liang,WU Zhao-tong. Study on the Reconfiguration Cost of Reconfigurable Manufacturing Systems[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2005, 0(9): 1-4 |
| |
| Authors: | LIN Ya-fu YANG Jiang-xin LOU Hong-liang WU Zhao-tong |
| |
| Abstract: | This paper presents the divided principle of reconfigurable cells based on operations containing degree, according to the attributes of setups' table. Analysing the relation between configurations and reconfigurable cells,then transfering the research of the reconfiguration between one configuration and the other to the reconfiguration among reconfigurable cells.Studying on the program of the reconfiguration among reconfigurable cells,and describing it by computer programming language(C++).Modeling the reconfiguration cost between one configuration and the other ,which is based on analysing the policy of the reconfiguration among reconfigurable cells.Finally,a case is studied to demonstrate the validity of models and the policy. |
| |
| Keywords: | reconfigurable manufacturing systems recoufigurable cells reconfiguraion cost |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
