首页 | 本学科首页   官方微博 | 高级检索  
     

一种降低多载波信号峰均比的技术
引用本文:张占胜. 一种降低多载波信号峰均比的技术[J]. 电子技术, 2014, 0(3): 83-85
作者姓名:张占胜
作者单位:京信通信系统有限公司,广东广州
基金项目:2012年广东省部产学研结合项目(编号:20128091000034)
摘    要:多载波信号峰均比的降低在现代功率放大器研究和设计中具有重要意义。文章基于多载波信号的包络特征,提出了一种全新的峰均比降低技术。理论分析和计算机仿真结果表明:文章所提出的技术可以较大程度的改变信号的包络分布,进而大幅度降低多载波信号的峰均比。从实验结果也可以看出,采用了这种新型多载波信号峰均比降低技术的功率放大器,线性与现有功率放大器相比得到大幅度改善。

关 键 词:峰均比  包络  多载波  功率放大器

A Technique for Reducing Multi-Carrier Signal Peak to Average Power Ratio
Zhang Zhansheng. A Technique for Reducing Multi-Carrier Signal Peak to Average Power Ratio[J]. Electronic Technology, 2014, 0(3): 83-85
Authors:Zhang Zhansheng
Affiliation:Zhang Zhansheng ( Comba Telecom System Holdings Ltd., Guangzhou, Guangdong)
Abstract:Reducing multi-carrier signal peak to average power ration has an important significance in the design and study of modem power amplifier. In this paper, based on the envelope characteristics of multi-carrier signal, a novel technique for reducing peak to average power ratio is proposed. The results of theoretical analysis and computer simulation show that the proposed technique can moderately change signal's envelope distribution, so that greatly reducing the peak to average power ratio of multi carrier. The results also show that the linearity of the amplifier using this new technique is significantly better than that of existin~ amplifier..
Keywords:peak to average power ratio  envelope  multi-carrier  power amplifier
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号