| 基于UG与MATLAB的风机叶片建模方法研究 |
| |
| 引用本文： | 闫磊,崔研.基于UG与MATLAB的风机叶片建模方法研究[J].机械工程与自动化,2012(2):32-34. |
| |
| 作者姓名： | 闫磊 崔研 |
| |
| 作者单位： | 华北电力大学机械工程系 |
| |
| 摘 要： | 通过UG实体建模绘制出风机叶片翼型的样条曲线,在曲线上拾取关键点并进行分析和处理,再利用MATLAB对点坐标进行图形变换,得到相应坐标。将数据导入UG,利用UG的样条曲线功能建立各截面的翼型曲线。最终通过扫掠截面线和所建立的引导线建立风机叶片的三维实体模型,为风机叶片的深层次研究打下基础。
|
| 关 键 词： | UG MATLAB 风机叶片 建模 |
Modeling Method Based on UG and MATLAB for Wind Turbine Blades |
| |
| YAN Lei,CUI Yan.Modeling Method Based on UG and MATLAB for Wind Turbine Blades[J].Mechanical Engineering & Automation,2012(2):32-34. |
| |
| Authors: | YAN Lei CUI Yan |
| |
| Affiliation: | (Department of Mechanical Engineering,North China Electric Power University,Baoding 071003,China) |
| |
| Abstract: | The spline curves of a wind turbine blade are drawn out by UG entity modeling.The key points on the curves are picked up,processed,and transformed by MATLAB to obtain the coordinates.The data are imported into UG to establish the wing curves of cross-sections by the function of spline curve in UG.Eventually,by sweeping through the section lines,the solid model of the wind turbine blade is established. |
| |
| Keywords: | UG MATLAB blades modeling |
| 本文献已被 CNKI 等数据库收录！ |
|
