| 三联齿轮注射模设计 |
| |
| 引用本文： | 姜伯军. 三联齿轮注射模设计[J]. 模具制造, 2006, 6(3): 46-48 |
| |
| 作者姓名： | 姜伯军 |
| |
| 作者单位： | 常州明顺电器有限公司,江苏,常州,213015 |
| |
| 摘 要： | 介绍了塑件的成型工艺及模具成型结构对塑件质量的影响分析，浇注系统的设计，模具成型部分和总装结构的设计。
|
| 关 键 词： | 塑件成型 工艺分析 浇注系统 模具结构 |
Design of Injection Mold for Three-Linkage Gear |
| |
| Jiang Bojun. Design of Injection Mold for Three-Linkage Gear[J]. Die & Mould Manufacture, 2006, 6(3): 46-48 |
| |
| Authors: | Jiang Bojun |
| |
| Abstract: | The moulding process of plastic parts, the effect analysis to quality caused by mold moulding structure, as well as the casting system and general design of mold moulding are introduced respectively. plastic parts design, partial |
| |
| Keywords: | plastic parts moulding process analysis casting system mold structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
