| 热成形工艺参数对AC1500HS钢板性能的影响 |
| |
| 引用本文： | 时晓光,董毅,韩斌,徐鑫,刘仁东.热成形工艺参数对AC1500HS钢板性能的影响[J].鞍钢技术,2013(5):24-28. |
| |
| 作者姓名： | 时晓光 董毅 韩斌 徐鑫 刘仁东 |
| |
| 作者单位： | 鞍钢股份有限公司技术中心,辽宁鞍山,114009;鞍钢股份有限公司技术中心,辽宁鞍山,114009;鞍钢股份有限公司技术中心,辽宁鞍山,114009;鞍钢股份有限公司技术中心,辽宁鞍山,114009;鞍钢股份有限公司技术中心,辽宁鞍山,114009 |
| |
| 摘 要： | 以鞍钢热成形用钢ACl500HS为研究对象．采用热模拟试验机测定了ACl500HS的CCT曲线并模拟了热成形工艺，确定了ACl500HS钢热成形工艺参数：对钢板进行热成形汽车零件试制，结果表明，该钢热成形性良好，零件尺寸精度达到要求。抗拉强度达到1500MPa以上，满足汽车零件装车要求。
|
| 关 键 词： | 汽车板 热成形 应变速率 |
Influence of Parameters of Hot stamping Technology on Properties of AC1500HS Steel Sheet |
| |
| Shi Xiaoguang,Dong Yi,Han Bin,Xu Xin,Liu Rendong.Influence of Parameters of Hot stamping Technology on Properties of AC1500HS Steel Sheet[J].Aisc Techniques,2013(5):24-28. |
| |
| Authors: | Shi Xiaoguang Dong Yi Han Bin Xu Xin Liu Rendong |
| |
| Affiliation: | (Technology Center of Angang Steel Co., Ltd., Anshan 114009, Liaoning,China) |
| |
| Abstract: | Taking the AC1500HS hot stamped steel produced by Angang as the study object, the CCT curves of the ACISOOHS steel are measured by thermal simulation testing machine and the simulation of hot stamping technology is carried out so that the parameters of the technology for hot stamping the steel are determined. Parts for automobiles are trial produced by hot stamping the AC1500HS steel sheet. The experimental results show that the forming performance of the steel is good. The dimensional accuracy of the parts made by the steel sheet meets requirements. For the tensile strength of the steel is more than 1 500 MPa, this kind of steel can meet the requirements to be used to make parts for assembling an automobile. |
| |
| Keywords: | steel sheet for automobile hot stamping strain rate |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
