Boosting the Thermoelectric Performance of the Doped DPP-EDOT Conjugated Polymer by Incorporating an Ionic Additive

The thermoelectric (TE) performance of organic materials is limited by the coupling of Seebeck coefficient and electrical conductivity. Herein a new strategy is reported to boost the Seebeck coefficient of conjugated polymer without significantly reducing the electrical conductivity by incorporation of an ionic additive DPPNMe₃Br . The doped polymer PDPP - EDOT thin film exhibits high electrical conductivity up to 1377 ± 109 S cm⁻¹ but low Seebeck coefficient below 30 µV K⁻¹ and a maximum power factor of 59 ± 10 µW m⁻¹ K⁻². Interestingly, incorporation of small amount (at a molar ratio of 1:30) of DPPNMe₃Br into PDPP - EDOT results in the significant enhancement of Seebeck coefficient along with the slight decrease of electrical conductivity after doping. Consequently, the power factor (PF) is boosted to 571 ± 38 µW m⁻¹ K⁻² and ZT reaches 0.28 ± 0.02 at 130 °C, which is among the highest for the reported organic TE materials. Based on the theoretical calculation, it is assumed that the enhancement of TE performance for the doped PDPP - EDOT by DPPNMe₃Br is mainly attributed to the increase of energetic disorder for PDPP - EDOT .