| 圆柱密封镉镍电池的设计 |
| |
| 引用本文： | 张杰,罗红宇. 圆柱密封镉镍电池的设计[J]. 电源技术, 1996, 0(3) |
| |
| 作者姓名： | 张杰 罗红宇 |
| |
| 作者单位： | 浙江岱山佳能电源有限公司 |
| |
| 摘 要： | 设计了专用于电动手枪钻的圆柱密封镉镍蓄电池.详述了正负极板、电解液、电池零部件的设计思路及工艺参数.按该设计制出的样品,尺寸为(?)22.0mm,高 42.4mm;0.2C放电容量 1480mAh;12A放电至0.9V的放电时间5.4min;1.2A充电1.75h不漏碱,不气胀;400mA充电24h不漏碱,不气胀.完全达到了设计要求.
|
| 关 键 词： | 圆柱密封镉-镍蓄电池 正极板 负极板 电解液 电动手枪钻 |
Design of cylindrical sealed nickel-cadmium cells |
| |
| Zhang Jie and Luo HongyuDaishan Jianeng Power Co. LTD.,Daishan Zhejiang. Design of cylindrical sealed nickel-cadmium cells[J]. Chinese Journal of Power Sources, 1996, 0(3) |
| |
| Authors: | Zhang Jie Luo HongyuDaishan Jianeng Power Co. LTD. Daishan Zhejiang |
| |
| Affiliation: | Zhang Jie and Luo HongyuDaishan Jianeng Power Co. LTD.,Daishan Zhejiang 316200 |
| |
| Abstract: | The design philosophy of sealed Ni-Cd cylindrical rechargeable cells for use in power-driven pistol drills are outlined. The technological parameters of cell components including positive and negative plates, electrolyte, and assembly parts are introduced. The performances of prototype (22 X 42. 4mm)with capacity of 1480 mAh at 0. 2C rated discharge and 5. 4min at 12A discharge to 0. 9V end were satisfied with design demands. No leakage or expansion were observed with 1. 2A charge for 1. 75h or 400mA charge for 24h. |
| |
| Keywords: | sealed nickel-cadmium cylindrical rechargeable cells positive plate negative plate electrolyte power-driven pistol drill |
| 本文献已被 CNKI 等数据库收录！ |
