Electrochemical corrosion behaviors of straight WC–Co alloys: Exclusive variation in grain sizes and aggressive media

The electrochemical corrosion behaviors of straight WC–10Co cemented carbides with grain sizes of 1.2, 2.6, 6.1 and 8.2 μm, were comparatively investigated in the solutions of NaOH (pH = 13), Na₂SO₄ (pH = 7) and H₂SO₄ (pH = 1) respectively. To insure a sole variable of WC grain sizes, specific magnetic saturation values of the alloys are adjusted to be identical. The results show a good linear dependence for R_ct (charge transfer resistance) and I_corr (corrosion current density) against the grain sizes. A high sensitivity of the grain sizes to both R_ct and I_corr are identified in NaOH and H₂SO₄. In the solutions of NaOH and Na₂SO₄, the alloys with smaller WC grain sizes exhibit better corrosion resistances, while the alloys with larger WC grain sizes exhibit better corrosion resistances in H₂SO₄. Additionally, in terms of the corrosiveness, NaOH is the weakest and H₂SO₄ is the most aggressive for all the alloys. The corrosion mechanisms were discussed in light of the SEM surface observation, X-ray photoelectron spectroscope analysis and the electrical equivalent circuits for electrochemical impedance spectroscopy.