| 喷射成形时雾化压力与静压头对雾化熔滴尺寸影响的理论分析 |
| |
| 引用本文： | 唐增武,曹福洋,孙剑飞,康福伟,沈军,李庆春. 喷射成形时雾化压力与静压头对雾化熔滴尺寸影响的理论分析[J]. 粉末冶金技术, 2006, 24(1): 13-17 |
| |
| 作者姓名： | 唐增武 曹福洋 孙剑飞 康福伟 沈军 李庆春 |
| |
| 作者单位： | 1. 哈尔滨工业大学金属精密热加工国防科技重点实验室,哈尔滨,150001;中国航天三院一五九厂,北京,100074
2. 哈尔滨工业大学金属精密热加工国防科技重点实验室,哈尔滨,150001 |
| |
| 摘 要： | 本文建立了静压头、雾化压力与雾化熔滴尺寸的模型关系。雾化压力一定，雾化熔滴质量中值直径随静压头的减小而减小；静压头一定。雾化熔滴尺寸随着雾化压力的增加而减小。通过模型，调节雾化压力以适应静压头变化引起的金属液体质量流率变化，以期得到具有合适尺寸的雾化熔滴，优化沉积坯组织。
|
| 关 键 词： | 喷射成形 静压头 组织 镍基高温合金 雾化压力 |
| 收稿时间： | 2004-07-12 |
| 修稿时间： | 2004-07-12 |
Effect of static head and pressure on atomization droplets size in spray forming: theory analysis |
| |
| Tang Zengwu,Cao Fuyang,Sun Jianfei,Kang Fuwei,Shen Jun,Li Qingchun. Effect of static head and pressure on atomization droplets size in spray forming: theory analysis[J]. Powder Metallurgy Technology, 2006, 24(1): 13-17 |
| |
| Authors: | Tang Zengwu Cao Fuyang Sun Jianfei Kang Fuwei Shen Jun Li Qingchun |
| |
| Affiliation: | 1 National Key Laboratory of Metal Precision Hot Processing, Harbin Institute of Technology, Harbin 150001, China; 2 The factory 159 of the 3^rd academy of CASIC, Beijing 100074, China |
| |
| Abstract: | The relationship model of static head in tundish,atomization pressure on the tip of nozzle and the mass median droplet diameter was established.The mass median droplet diameter will decrease with reducing static head when the atomization back pressure is a settled value(the atomization pressure does not change) and with increase of atomization pressure(static head is constant).In order to get good quality preform,the change of metal flow rate caused by the change of static head was adjusted by altering the atomization pressure by this model. |
| |
| Keywords: | spray forming static head microstructure Ni-based superalloy atomization pressure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
