首页 | 本学科首页   官方微博 | 高级检索  
     

基于EDEM的双卧轴搅拌机合理充盈率探究
引用本文:孔鲜宁,杨宏晓,李耀.基于EDEM的双卧轴搅拌机合理充盈率探究[J].水泥工程,2015,28(5):9-12.
作者姓名:孔鲜宁  杨宏晓  李耀
作者单位:长安大学,长安大学,长安大学
摘    要:基于EDEM离散元软件,对双卧轴搅拌机在不同充盈率下物混合料搅拌均匀性进行仿真分析,探究合适的充盈率。首先从理论上分析充盈率对搅拌均匀性的影响;其次在EDEM中设置3种不同充盈率进行运动仿真,最后通过对比不同充盈率下骨料和粉料离散系数随时间的变化情况,分别计算各自的有效生产量。综合仿真情况得出:较合理的充盈率为0.35,此时有效出料量最大,总体上阻力相对较小。

关 键 词:EDEM    双卧轴搅拌机    充盈率    搅拌均匀性    有效出料量

Discussion on reasonable filling rate for twin shaft mixer based on EDEM
Kong Xianning,Yang Hongxiao and Li Yao.Discussion on reasonable filling rate for twin shaft mixer based on EDEM[J].Cement Engineering,2015,28(5):9-12.
Authors:Kong Xianning  Yang Hongxiao and Li Yao
Affiliation:Chang''an University,Chang''an University and Chang''an University
Abstract:Based on the discrete element software EDEM, to find a suitalbe filling rate, the mixing material uniformity of twin shaft mixer at different filling rate is simulated and analysed. Firstly, the effect of filling rate on the mixing uniformity is analyzed. Secondly, three different filling rate is set up in EDEM. Finally, the effective production rate is calculated by comparing the variation of the dispersion coefficient of the aggregate and powder at different filling rate with the change of time. Comprehensive simulation of the situation: the reasonable filling rate is 0.35, with wchich the effective discharge of the material is the largest, the overall resistance is relatively small.
Keywords:EDEM  double shaft mixer  filling rate  mixing uniformity  effective discharge of material
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《水泥工程》浏览原始摘要信息
点击此处可从《水泥工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号