| 压电自适应脉冲式电火花加工放电通道粒子流场模拟 |
| |
| 引用本文： | 张春幸,张勤河,付秀琢,张亚.压电自适应脉冲式电火花加工放电通道粒子流场模拟[J].电加工与模具,2011(5):1-4. |
| |
| 作者姓名： | 张春幸 张勤河 付秀琢 张亚 |
| |
| 作者单位： | 山东大学机械工程学院,山东济南,250061 |
| |
| 基金项目： | 国家自然科学基金资助项目，教育部回国留学人员人员科研启动基金，新世纪优秀人才支持计划 |
| |
| 摘 要： | 压电自适应脉冲式电火花加工是一种新型电火花加工方法.通过分析放电通道的形成过程,采用PIC/MCC相结合的方法,对压电自适应脉冲式电火花加工放电通道进行了微观粒子模拟,得到带电粒子(电子和正离子)在放电通道内的分布规律.仿真结果显示放电通道位形呈腰鼓状,通道中任意横截面带电粒子的空间分布符合高斯分布,为电火花加工温度场...
|
| 关 键 词： | 电火花加工 放电通道 蒙特卡罗碰撞 表面热流 |
Simulation of Particle Flow in Discharge Channel for Self-activated Electrical Discharge Machining |
| |
| Zhang Chunxing,Zhang Qinhe,Fu Xiuzhuo,Zhang Ya.Simulation of Particle Flow in Discharge Channel for Self-activated Electrical Discharge Machining[J].Electromachining & Mould,2011(5):1-4. |
| |
| Authors: | Zhang Chunxing Zhang Qinhe Fu Xiuzhuo Zhang Ya |
| |
| Affiliation: | (Shandong University,Jinan 250061,China) |
| |
| Abstract: | Self-activated EDM is a new machining method.The mechanism of discharge channel forming is analyzed in this paper.Particle-in-cell plus Monte-Carlo Collision method is used to simulate the particle flow in discharge channel of self-activated EDM and the distribution of particles with electric charge is clarified.From the simulation,movement phase diagram of electronic and positive ions is gotten and the density distribution being similar to shape of gaussian distribution is proved.Simulation of discharge channel has important meaning to mechanism study of EDM. |
| |
| Keywords: | EDM discharge channel Monte-Carlo Collision surface heat flux |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
