| 工艺条件对HDPE／PA—6共混体系形态结构影响的研究 |
| |
| 引用本文： | 冯钠,项素云.工艺条件对HDPE／PA—6共混体系形态结构影响的研究[J].中国塑料,2000,14(4):44-47. |
| |
| 作者姓名： | 冯钠 项素云 |
| |
| 作者单位： | 大连轻工业学院材料科学工程系!大连116034(冯钠)，大连理工大学高分子材料系!大连116012(项素云，王益龙，李建丰) |
| |
| 摘 要： | 通过测试ＨＤＰＥ、ＰＡ－６的流变性能和对共混物进行显微镜法（ＰＣＭ）分析，研究了加工温度和剪切速率等工艺条件对ＨＤＰＥ／ＰＡ－６共混形态结构的影响。结果表明：改变加工温度可以调节ＨＤＰＥ／ＰＡ－６共混组成粘度比。ＰＡ－６和ＨＤＰＥ的粘讧比较大时，ＰＡ－６相呈层状分布结构，剪切作用有利于共混体系两相的分散，剪切速率过低易使ＰＡ－６相区尺寸大，分散不均匀。较高的剪切速率使ＰＡ－６相尺寸减小，分散更均匀
|
| 关 键 词： | 共混体系 形态结构 流变性能 HDPE PA－6 |
Study on Effects of Processing Condition on Morphological Structure of HDPE/PA-6 Blends |
| |
| Feng Na.Study on Effects of Processing Condition on Morphological Structure of HDPE/PA-6 Blends[J].China Plastics,2000,14(4):44-47. |
| |
| Authors: | Feng Na |
| |
| Abstract: | Based on testing of rheological properties of HDPE and PA 6 as well as PCM analysis of HDPE/PA 6 blends,effects of processing condition such as processing temperature and shearing rate on morphological structure of the blends are studied.Results show that viscosity ratio of HDPE and PA 6 can be adjusted by changing processing temperature.Higher viscosity ratio results in the emergence of laminar structure of PA 6 phase.Shear can improve distribution of two phases of the blend.Lower shearing rate is liable to cause PA 6 phase size larger and uneven distrbution,and higher shearing rate,phase size smaller and even distribution.Laminar HDPE/PA 6 blends which are resistance to oil can be obtained under the suitable processing temperature and shearing rate. |
| |
| Keywords: | Blend Morphological structure Rheological properties |
| 本文献已被 CNKI 维普 等数据库收录！ |
