Effects of superfatting agents on cracking phenomena in toilet soap

Palm stearin (POs) is one of the cheapest sources of C16–C18 fatty acids for use in soap making. Toilet-soap formulations containing a high content of POs, however, would result in hard soaps with a tendency to form cracks on the surface. This phenomenon can be overcome by addition of superfatting agents to increase plasticity of the finished product. In this study, two different blends of soap made from distilled POs, palm oil (PO), and palm kernel oil (PKO) fatty acids in the ratio of 40POs/40PO/20PKO and 70POs/30PKO were evaluated. The soaps were superfatted with glycerin, palm kernel olein, coconut oil, olive oil and canola oil. The levels of incorporation of each superfatting material were 1, 2, 4, and 6%, respectively. The samples were subsequently tested for both wet and dry crackings using the Hewitt Soap Company methods (numbers 78 and 79, respectively). The superfatted soaps had a total fatty matter of 73–83% and an average moisture content of 10%. The penetration value which indicates hardness increased with increasing amount of superfatting agents. Foaming or lathering property was good with the exception of the formulation using palm kernel olein and canola oil as superfatting agents. At all the above levels of superfatting agents added, no cracks were observed during both wet and dry cracking tests. A sample of soap superfatted with 2% canola oil, however, developed cracks during the wet cracking test. This resulted in a test score of 7. Superfatting soaps with 1–2% neutral oils or glycerin resulted in better quality soaps that were free of cracks.