Morphological and Thermal Properties of ABS/Montmorillonite Nanocomposites Using ABS with Different AN Contents

Acrylonitrile‐butadiene‐styrene (ABS)/clay nanocomposites have been prepared using two types of ABS with different AN contents and a chemically modified clay, Cloisite 20A. The composites were prepared by melt mixing in a twin‐screw extruder. Their morphological properties were characterized by XRD and TEM. The thermal stability of the polymer nanocomposites was studied using TGA and flammability tests. The results were analyzed in terms of the effect of the clay content and the type of ABS used on the clay dispersion and the thermal stability of the nanocomposites. Experimental results confirmed that better dispersion and intercalation and/or exfoliation can be obtained when using an ABS with a higher AN content. The study using TGA and flammability tests showed that the nanodispersed layers of silicate enhanced the thermal stability of the ABS matrix, and that an ABS with higher AN content was more effective in providing fire retardancy. This suggests that when using higher AN contents, more polar groups are present within the polymer matrix, allowing a more homogeneous dispersion and intercalation of the chain polymers into the organomodified montmorillonite clay (MMT), and even some exfoliation of the nanoclay.