|
|||||
|
|
Preparation of porous polyacrylamide hydrogels by frontal polymerization |
|
| Authors: | Guo Dong Lu Qing Zhi Yan Chang Chun Ge |
| Affiliation: | 1. Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China;2. Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, ChinaLaboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China |
| Abstract: | Polyacrylamide hydrogels with defined porous structure were synthesized through frontal polymerization (FP) in the presence of NaHCO3 as a foaming agent. Pore properties were analyzed using scanning electron microscopy and mercury intrusion porosimetry. The as‐prepared hydrogels displayed a small cell diameter of ca 2 µm. The dissolved foaming agent dispersing at the level of molecules and the polymerization front propagating step by step should be responsible for the small uniform cell structure. The pore volume varied from 0.63 to 3.65 cm3 g?1 and the bulk density changed from 0.48 to 0.28 g cm?3 for a foaming agent content from 0 to 18%. The hydrogels synthesized by FP exhibited higher swelling rate and swelling ratio with respect to conventional batch polymerization. The highest swelling ratio and rate were obtained at a foaming agent concentration of 12% based on monomer. Copyright © 2007 Society of Chemical Industry |
| Keywords: | porous hydrogel frontal polymerization (FP) foaming agent pore structure swelling property |