Molecular,rheological, and crystalline properties of low‐density polyethylene in blown film extrusion |
| |
| Authors: | Khokan Kanti Majumder Graham Hobbs Sati N Bhattacharya |
| |
| Affiliation: | 1. Rheology and Materials Processing Centre, RMIT University, Melbourne, Victoria, Australia;2. AMCOR Research and Technology, Alphington, Victoria, Australia;3. Rheology and Materials Processing Centre, RMIT University, Melbourne, Victoria, AustraliaRheology and Materials Processing Centre, RMIT University, Melbourne, Victoria, Australia |
| |
| Abstract: | The molecular weight and its distribution, degree of long chain branching and cooling rate strongly influence crystallinity during processing, which in turn determines the processability and the ultimate properties of the blown film. Generally a decrease in the number of branches and molecular weight of the polymer and the cooling rate results in an increase of the crystallinity. Length of the main chain and extent of branching in low‐density polyethylene (LDPE) are also factors that affect melt rheology and film crystallinity. Long chain branched polyethylene is suitable in the blown film process due to its better melt strength for bubble stability. The objective of this article is to describe the effect of molecular properties (e.g. molecular weight and its distribution, degree of long chain branching etc) of LDPE on film crystallinity at different cooling rates of blown film extrusion. Two different grades of LDPE were selected to investigate molecular characteristics, crystallinity, and rheology. The resins were processed in a blown film extrusion pilot plant using four different cooling rates. Molecular, rheological, and crystalline properties of the resins were key parameters considered in this study. POLYM. ENG. SCI., 47:1983–1991, 2007. © 2007 Society of Plastics Engineers |
| |
| Keywords: | |
|
|
