首页 | 本学科首页   官方微博 | 高级检索  
     

对土的三维掘削模式的分析
引用本文:赵伟民,诸文农.对土的三维掘削模式的分析[J].吉林大学学报(工学版),1998(3).
作者姓名:赵伟民  诸文农
作者单位:吉林工业大学机械科学与工程学院
基金项目:国家“八五”科技攻关!(EX - 92 - 0 4 - 1/0 8)
摘    要:在掘削土的过程中 ,当刀板运动方向与刀刃线垂直时为平面掘削状态 ,即二维掘削模式。当刀板运动方向与刀刃线不垂直时 ,土在刀板上的运动状态发生很大变化 ,并与刀板的几何参数密切相关 ,这时为空间掘削状态 ,即三维掘削模式。本文探讨了三维掘削模式下刀具几何参数的影响 ,并通过试验进行了分析。

关 键 词:三维掘削模式  刀具几何参数  土的运动状态

Analysis of Three-dimensional Cutting Mode for Earth
Zhao Weimin,Zhu Wennong.Analysis of Three-dimensional Cutting Mode for Earth[J].Journal of Jilin University:Eng and Technol Ed,1998(3).
Authors:Zhao Weimin  Zhu Wennong
Abstract:In process of earth cutting when the motion direction of the cutter is perpendicular to its edge line,there is plane cutting condition,that is,two dimensional cutting mode.When the motion direction of the cutter is not perpendicular to its edge line there is three dimensional cutting mode.This paper inquires into the effect of cutter geometrical parameter under three dimensional cutting mode and analyses it through experiment.
Keywords:three-dimensional cutting mode  cutter geometrical parameter
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号