首页 | 本学科首页   官方微博 | 高级检索  
     

AAC氧化沟工艺中污泥上浮的原因与控制
引用本文:姜亚敏,买文宁,李宁.AAC氧化沟工艺中污泥上浮的原因与控制[J].工业水处理,2006,26(4):78-80.
作者姓名:姜亚敏  买文宁  李宁
作者单位:郑州大学环境与水利学院,河南,郑州,450002;郑州大学环境与水利学院,河南,郑州,450002;郑州大学环境与水利学院,河南,郑州,450002
摘    要:分析了采用AAC氧化沟工艺的城市污水厂污泥上浮的主要原因.认为大量硝态氮进入二沉池并发生反硝化产生N2是污泥上浮的主要原因,并针对此提出了加大排泥量、降低曝气量等解决方案.

关 键 词:AAC氧化沟  污泥上浮  反硝化
文章编号:1005-829X(2006)04-0078-03
收稿时间:2005-07-01
修稿时间:2005年7月1日

Cause and controlling measures of floating upward of sludge in AAC oxidation ditch process
Jiang Yamin,Mai Wenning,Li Ning.Cause and controlling measures of floating upward of sludge in AAC oxidation ditch process[J].Industrial Water Treatment,2006,26(4):78-80.
Authors:Jiang Yamin  Mai Wenning  Li Ning
Affiliation:School of Environment and Water Conservancy, Zhengzhou University, Zhengzhou 450002, China
Abstract:The main cause of floating upward of sludge is discussed. It occurs in a municipal wastewater plant. Large quantity of nitric nitrogen flows into the secondary sedimentation tank which produces N2 by denitrification, as is believed to be the main cause of floating upward of sludge in this plant. Measures against this problem are put forward, such as increasing the amount of the discharged sludge, decreasing the amount of the aerated air, etc.
Keywords:oxidation ditch  floating upward of sludge  denitrification
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号