| 基于热加工图的钼金属热变形特征研究 |
| |
| 引用本文： | 王玉凤,李付国,赵 伟,刘趁意,付静波.基于热加工图的钼金属热变形特征研究[J].稀有金属材料与工程,2009,38(8):1358-1362. |
| |
| 作者姓名： | 王玉凤 李付国 赵 伟 刘趁意 付静波 |
| |
| 作者单位： | 1. 西北工业大学,陕西,西安,710072
2. 金堆城钼业股份有限公司,陕西,西安,710068 |
| |
| 摘 要： | 通过热压缩试验研究钼金属在应变速率为0.01～10 s-1,变形温度为900～1450 ℃条件下的热变形性能,建立了基于流变应力的钼金属热变形的本构方程.综合考虑应变速率和变形温度对材料微观结构及性能的影响,根据动态材料模型(DMM)建立了钼金属的热加工图,并利用加工图确定了热变形时的流变失稳区,分析了不同区域钼金属的高温变形特征.
|
| 关 键 词： | 钼金属 加工图 本构关系 变形特征 |
| 收稿时间： | 2008/7/27 0:00:00 |
| 修稿时间： | 2009/5/16 0:00:00 |
Study on Hot Deformation Characteristics of Molybdenum Based on Processing Map |
| |
| Wang Yufeng,Li Fuguo,Zhao Wei,Liu Chenyi and Fu Jingbo.Study on Hot Deformation Characteristics of Molybdenum Based on Processing Map[J].Rare Metal Materials and Engineering,2009,38(8):1358-1362. |
| |
| Authors: | Wang Yufeng Li Fuguo Zhao Wei Liu Chenyi and Fu Jingbo |
| |
| Abstract: | Hot deformation characteristics of molybdenum was investigated by hot compression tests carried out in the temperature range of 900-1450 °C and strain rate range of 0.01-10 s-1. A constitutive equation of hot deformation of molybdenum based on the flow stress was established. With consideration of the effects of the deformation temperatures and the stain rates on microstructures and properties of molybdenum, processing maps were established based on the dynamic material model (DMM). And the instability zones of flow behavior could also be recognized by the maps. The hot deformation characteristics of molybdenum in different zones were also analyzed. |
| |
| Keywords: | molybdenum processing map constitutive relation deformation characteristics |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
|
