| 离子注入导致的空洞及其对磨损特性的影响 |
| |
| 引用本文： | 杨建华,张通和,陈俊. 离子注入导致的空洞及其对磨损特性的影响[J]. 纺织高校基础科学学报, 1992, 0(4) |
| |
| 作者姓名： | 杨建华 张通和 陈俊 |
| |
| 作者单位： | 南通纺织工学院，北京师范大学，北京师范大学 南通 226007，北京 100875，北京 100875 |
| |
| 摘 要： | 在剂量为1×10~(17)cm~(-2)和温度为310℃下,观察到强束流脉冲钨离子注入H13钢所形成的空洞。探讨了空洞的形成原因并发现空洞能提高H13钢的硬度而使其磨损性能变差。
|
| 关 键 词： | 钨离子注入 空洞 显微硬度 |
Voids Caused by Ion Implantation and Their Influence on Wear Resistance |
| |
| Yang Jianhua. Voids Caused by Ion Implantation and Their Influence on Wear Resistance[J]. Basic Sciences Journal of Textile Universities, 1992, 0(4) |
| |
| Authors: | Yang Jianhua |
| |
| Abstract: | Under low dose temperature, voids formed by W-implanted H13 steel have been observed. Causes of voids formed are discussed. The hardness of H13 steel increases and wear resistance becomes bad. |
| |
| Keywords: | Wion implantation void microscopy hardness |
| 本文献已被 CNKI 等数据库收录！ |
