首页 | 本学科首页   官方微博 | 高级检索  
     

平顶山矿区主采煤层孔隙特征研究
引用本文:王英伟,王满.平顶山矿区主采煤层孔隙特征研究[J].煤炭技术,2020,39(1):98-100.
作者姓名:王英伟  王满
作者单位:炼焦煤资源开发及综合利用国家重点实验室,河南平顶山467000;中国平煤神马集团能源化工研究院,河南平顶山467000;炼焦煤资源开发及综合利用国家重点实验室,河南平顶山467000;中国平煤神马集团能源化工研究院,河南平顶山467000
摘    要:对平顶山矿区主采煤层丁组、戊组和己组煤样进行低温氮气吸附试验,分析等温吸附-脱附曲线形态,计算孔体积和比表面积,研究了不同煤层的孔形态及其对瓦斯的吸附-解吸能力。实验结果表明:原始煤层煤样比表面积为0.026~2.988 m^2/g,以小于8 nm的孔为主;孔隙结构复杂,大量存在一端闭合孔和"墨水瓶"孔,增加了煤层瓦斯抽采难度。

关 键 词:氮吸附  比表面积  孔径  孔类型

Study on Pore Characteristics of Main Coal Seam in Pingdingshan Mining Area
WANG Ying-wei,WANG Man.Study on Pore Characteristics of Main Coal Seam in Pingdingshan Mining Area[J].Coal Technology,2020,39(1):98-100.
Authors:WANG Ying-wei  WANG Man
Affiliation:(State Key Laboratory of Coking Coal Exploitation and Comprehensive Utilization,Pingdingshan 467000,China;Institute of Energy and Chemical Industry,China Pingmei Shenma Group,Pingdingshan 467000,China)
Abstract:The adsorption of nitrogen in low temperature experiments were carried out on the coal samples of coal group Ⅳ, Ⅴ and Ⅵ in Pingdingshan coal mine. The morphology of isothermal adsorption-desorption curve was analyzed and the pore volume and specific surface area were calculated. The pore morphology of different coal seams and their adsorption capacity to gas were studied. The experimental results show that the specific surface area of the coal samples in the original coal seam ranges from 0.026 to 2.988 m^2/g, with the pores smaller than 8 nm being dominant. The micropores are dominated by open vents and impervious holes closed at one end.
Keywords:nitrogen adsorption  specific surface area  pore size  pore type
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号