| 基于Workbench的组合式锚钻机关键零部件仿真研究 |
| |
| 引用本文： | 常炳哲,吴娟. 基于Workbench的组合式锚钻机关键零部件仿真研究[J]. 煤矿机械, 2020, 41(2): 44-46 |
| |
| 作者姓名： | 常炳哲 吴娟 |
| |
| 作者单位： | 太原理工大学机械与运载工程学院,太原030024;矿山流体控制国家地方联合工程实验室,太原030024;山西省矿山流体控制工程技术研究中心,太原030024 |
| |
| 摘 要： | 利用Workbench对液压夹持器进行分析,得到在不同工况下的工作振动频率与其固有频率之间的关系;对顶锚排钻框架进行静力学分析,可知顶锚排钻框架设计满足强度要求且变形较小。研究结果表明,液压夹持器与顶锚排钻框架具有强度高、运行稳定性好等特点,为锚杆支护工程施工装备的研究提供了理论参考。
|
| 关 键 词： | 组合式锚杆钻机 液压夹持器 顶锚排钻框架 仿真分析 |
Simulation Research on Key Parts of Combined Anchor Drilling Rig Based on Workbench |
| |
| Chang Bingzhe,Wu Juan. Simulation Research on Key Parts of Combined Anchor Drilling Rig Based on Workbench[J]. Coal Mine Machinery, 2020, 41(2): 44-46 |
| |
| Authors: | Chang Bingzhe Wu Juan |
| |
| Affiliation: | (College of Mechanical and Vehicle Engineering,Taiyuan University of Technology,Taiyuan 030024,China;National-local Joint Engineering Laboratory of Mining Fluid Control Laboratory,Taiyuan 030024,China;Shanxi Province Mineral Fluid Controlling Engineering Technology Research Center,Taiyuan 030024,China) |
| |
| Abstract: | Workbench was used to analyze the hydraulic gripper, and the relationship between the working vibration frequency and its natural frequency under different working conditions was obtained.Static analysis of the top anchor row drilling frame shows that the design of the top anchor row drilling frame meets the strength requirements and the deformation is small. The research results show that the hydraulic gripper and the top anchor row drilling frame have the characteristics of high strength and good operation stability, which provides a theoretical reference for the research of construction equipment of anchor support engineering. |
| |
| Keywords: | combined anchor drilling rig hydraulic gripper top anchor row drilling frame simulation analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
