| 汽车保险杠注射模设计 |
| |
| 引用本文： | 黄智.汽车保险杠注射模设计[J].模具制造,2020(1):60-63. |
| |
| 作者姓名： | 黄智 |
| |
| 作者单位： | 中山职业技术学院 广东中山 528400 |
| |
| 摘 要： | 根据汽车保险杠产品的结构和塑料材料,结合MoldFlow软件对该塑件进行了模流分析,介绍了保险杠注射模主要零件的结构特点,并根据实际情况确定采用热流道进料系统,型腔采用整体结构,型芯采用拼接式结构,扣位采用侧滑块脱模结构,冷却水采用集水块结构,并在车灯位置增加排气槽。该模具结构设计合理,生产效率高。
|
| 关 键 词： | 汽车保险杠 注射模 热流道 |
Design of Injection Mold for Automobile Bumper |
| |
| Abstract: | According to the product structure of bumper and plastic material,combined with MoldFlow software to the mold flow analysis,bumper injection mold structure characteristics of the main parts are introduced,and according to the actual situation to determine feeding system using hot runner,cavity adopts integral structure,mosaic structure is used to core,buckle with inclined top type demoulding structure,cold water,the water block structure,and increase exhaust slot in the lamp position,proved by practical production.This mold structure design is reasonable,high production efficiency. |
| |
| Keywords: | automobile bumper injection mold hot runner PP material |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
