| 包胶辊开裂原因分析 |
| |
| 引用本文： | 王荣,陈华锋,陆频,史建华.包胶辊开裂原因分析[J].理化检验(物理分册),2008,44(10):585-587. |
| |
| 作者姓名： | 王荣 陈华锋 陆频 史建华 |
| |
| 作者单位： | [1]上海材料研究所,上海200437 [2]宝钢工业检测公司,上海200941 |
| |
| 摘 要： | 采用化学成分分析、宏观和微观组织检验以及力学性能测定等方法对在使用过程中发生开裂的包胶辊进行了分析。结果表明，由于错误地将平衡重焊在了辊筒内壁，由此造成辊筒的显微组织和力学性能以及受力状况发生了变化。在承受频繁的弯曲应力作用后，在其焊接热影响区萌生了裂纹源进而发生疲劳开裂。
|
| 关 键 词： | 包胶辊 开裂 平衡重 焊接热影响区 旋转弯曲 疲劳开裂 |
CRACKING ANALYSIS OF ENCAPSULATED ROLLER |
| |
| WANG Rong,CHEN Hua-feng,LU Pin,SHI Jian-hua.CRACKING ANALYSIS OF ENCAPSULATED ROLLER[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2008,44(10):585-587. |
| |
| Authors: | WANG Rong CHEN Hua-feng LU Pin SHI Jian-hua |
| |
| Affiliation: | WANG Rong, CHEN Hua-feng , LU Pin , SHI Jian-hua (1. Shanghai Research Institute of Materials , Shanghai 200437,China; 2. Baogang Industry Test Company , Shanghai 200941 ,China) |
| |
| Abstract: | The cracking encapsulated roller in use was analyzed by means of chemical composition, macrostructure and microstructure examination and mechanical property test. The results showed that counterweight had been welded wrongly in inwall of roll cylinder, the microstructure of roll cylinded, mechanical property and stress state had been changed. In frequent bending stress condition, fatigue cracking occurred due to the cracking source had been initiated in welding heat affected zone |
| |
| Keywords: | encapsulated roller cracking counterweight welding heat affected zone rotary bending fatigue cracking |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
