| PA／粘合剂／PE三层复合膜的再生技术 |
| |
| 引用本文： | 杨鸣波,冯建民.PA／粘合剂／PE三层复合膜的再生技术[J].现代塑料加工应用,1995,7(1):33-36. |
| |
| 作者姓名： | 杨鸣波 冯建民 |
| |
| 作者单位： | 成都科技大学 610065
(杨鸣波，冯建民)，成都科技大学塑料工程系 92届毕业生
(江英)，成都科技大学塑料工程系 92届毕业生(赵湘华) |
| |
| 摘 要： | 介绍了对聚酰胺（ＰＡ）粘合剂／聚乙烯（ＰＥ）三层复合膜的再生技术研究情况。运用正交设计实验方法进行了配方选择，采用方差分析方法进行了可靠性验证。选出的最佳配方具有良好的成膜性和加工性能，膜的综合力学性能良好，还通过偏光显微镜对体系进行了形态分析，证实了加相容剂的体系分散更均匀，分散相颗粒尺寸变小，增容效果明显。
|
| 关 键 词： | 聚酰胺 聚乙烯 相容剂 共混 塑料薄膜 |
REWORKING TECHNOLOGY OF THREE-LAYER COMPOSITE FILM OF PA/ADHESIVE/PE |
| |
| Yang Mingbo Feng Jianmin Jiang Ying Zhao Xianghua.REWORKING TECHNOLOGY OF THREE-LAYER COMPOSITE FILM OF PA/ADHESIVE/PE[J].Modern Plastics Processing and Applications,1995,7(1):33-36. |
| |
| Authors: | Yang Mingbo Feng Jianmin Jiang Ying Zhao Xianghua |
| |
| Affiliation: | Chcndu University of Science and Technology |
| |
| Abstract: | The research situation of reworking technology of PA/adhcsivc/PE three-layer composite film was reviewed. The formulation was chosen by orthogonal design experiment method, and the reliability was examined by variance analysis. The chosen optimum formulation had good film reforming properties, processing properties, complex mechanical properties of film. The morphology of system was analysed by polarized microscope, and the result showed that adding compatilizcr to system the dispersion was better, the size of particle in dispersed part got smaller, compatilizing effect was obvious. |
| |
| Keywords: | PA/ PE compatilizcr reworking technology |
| 本文献已被 CNKI 维普 等数据库收录！ |
