| 宽薄腹工形截面压弯构件的平面外稳定设计 |
| |
| 引用本文： | 杨应华.宽薄腹工形截面压弯构件的平面外稳定设计[J].钢结构,2006,21(5):88-91. |
| |
| 作者姓名： | 杨应华 |
| |
| 作者单位： | 西安建筑科技大学,土木工程学院,西安,710055 |
| |
| 摘 要： | 《钢结构设计规范》(GB50017-2003)、《门式刚架轻型房屋钢结构技术规程》(CECS102∶2002)关于宽薄腹工形等截面压弯构件的平面外稳定计算,虽然基本原理相同,但具体方法差别很大。通过对试验数据、数值法的分析结果与按这两种方法的结果比较,发现“规范”的方法在很大范围内偏于保守,不甚合理;而“门规”的方法更为经济合理,建议规范也采用“门规”的方法对宽薄腹工形截面压弯构件的平面外稳定进行计算,使设计更加统一,经济合理。
|
| 关 键 词： | 压弯构件 宽薄腹板 平面外稳定 设计 |
| 收稿时间： | 2006-05-20 |
| 修稿时间： | 2006年5月20日 |
OUT-OF-PLANE STABILITY DESIGN OF I-SECTIONED BEAM-COLUMNS WITH SLENDER WEB |
| |
| Yang Yinghua.OUT-OF-PLANE STABILITY DESIGN OF I-SECTIONED BEAM-COLUMNS WITH SLENDER WEB[J].Steel Construction,2006,21(5):88-91. |
| |
| Authors: | Yang Yinghua |
| |
| Abstract: | The out-of-plane stability design methods for I-sectioned beam-columns with slender web in both Chinese codes GB 50017-2003 and CECS 102∶2002,though based on the same principle,yet differ greatly.Comparing the ultimate loads from these two approaches with those from testing and parametric studies by an elasto plastic finite spline strip method,it is found that the method in CECS 102∶2002 is more economical and rational than that in GB 50017-2003,which is rather conservative for most cases.It is,therefore,suggested that the method in CECS 102∶2002 be also adopted in GB 50017-2003 to make the design of such members according to compatibility of the two codes. |
| |
| Keywords: | beam-columns slender web out-of-plane stability design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
