| 分段沉积/雕铣成形的工艺规划研究 |
| |
| 引用本文： | 张美琴,肖树才,张扬龙,江开勇.分段沉积/雕铣成形的工艺规划研究[J].现代制造工程,2007(3):78-80. |
| |
| 作者姓名： | 张美琴 肖树才 张扬龙 江开勇 |
| |
| 作者单位： | 华侨大学机电学院,泉州,362021 |
| |
| 摘 要： | 分段沉积/雕铣成形技术是快速原型结合传统加工方法的一种新的工艺,兼有快速原型的高柔性和传统加工的高精度.对分段沉积/雕铣成形技术中零件的分段、薄壁件的加工、尖角的加工、曲面的加工等一些特殊工艺进行合理的工艺规划,提出解决措施.
|
| 关 键 词： | 分段沉积/雕铣成形 工艺规划 研究 分段沉积 雕铣成形 工艺规划 规划研究 deposition process planning 解决措施 特殊工艺 曲面 尖角 壁件 零件 精度 传统加工方法 结合 快速原型 成形技术 |
| 文章编号： | 1671-3133(2007)03-0078-03 |
| 修稿时间： | 2006年8月21日 |
Study on the process planning of subsection deposition and sculpture |
| |
| Zhang Mei-qin,Xiao Shu-cai,Zhang Yang-long,Jiang Kai-yong.Study on the process planning of subsection deposition and sculpture[J].Modern Manufacturing Engineering,2007(3):78-80. |
| |
| Authors: | Zhang Mei-qin Xiao Shu-cai Zhang Yang-long Jiang Kai-yong |
| |
| Abstract: | The process of Subsection Deposition and Sculpture(SDS)is a new process,which is the outcome of RP combining with traditional processing.It inherits the flexibility of RP and high precision of traditional processing. How to plan reasonable process planning of thin wall part, sharp angle and curved surface in SDS were studied and corresponding solutions were performed. |
| |
| Keywords: | Subsection Deposition and Sculpture(SDS) Process planning Study |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
