| 斜角切削变形的实验分析 |
| |
| 引用本文： | 张维纪 徐力. 斜角切削变形的实验分析[J]. 浙江大学学报(工学版), 1990, 24(2): 271-277 |
| |
| 作者姓名： | 张维纪 徐力 |
| |
| 作者单位： | 浙江大学机械系
(张维纪)，浙江大学机械系(徐力) |
| |
| 摘 要： | 本文以实验方法研究自由斜角切削过程中流属平面内的切屑变形情况,并与相应的直角切削相比较,探讨将三维切削(斜角切削)向二维切削(直角切削)转化的实验分析。
|
| 关 键 词： | 切削变形 斜角 直角 变形 切削 |
The Test Analysis of Deformation in Oblique Cutting |
| |
| Zhang Weiji Xu Li. The Test Analysis of Deformation in Oblique Cutting[J]. Journal of Zhejiang University(Engineering Science), 1990, 24(2): 271-277 |
| |
| Authors: | Zhang Weiji Xu Li |
| |
| Affiliation: | Dept. of Mechanical Engineering |
| |
| Abstract: | In this paper, a test method is put forward to investigate the deformation of chip on the chip-flow plane during free oblique cutting. It's deformation is compared with that of corresponding orthogonal cutting. It is further explored that the test analysis of transfering threedimension cutting ( oblique cutting ) into two-dimension cutting ( orthogonal cutting). |
| |
| Keywords: | Oblique cutting Chip deformation Orthogonal cutting |
| 本文献已被 CNKI 维普 等数据库收录！ |
