首页 | 本学科首页   官方微博 | 高级检索  
     

基于ADAMS的多刚体动力学简化建模与仿真
引用本文:王坤,邢海军,徐梦超,张林浩. 基于ADAMS的多刚体动力学简化建模与仿真[J]. 图学学报, 2019, 40(4): 733. DOI: 10.11996/JG.j.2095-302X.2019040733
作者姓名:王坤  邢海军  徐梦超  张林浩
作者单位:石家庄铁道大学机械工程学院,河北石家庄,050043;石家庄铁道大学机械工程学院,河北石家庄,050043;石家庄铁道大学机械工程学院,河北石家庄,050043;石家庄铁道大学机械工程学院,河北石家庄,050043
摘    要:摘 要:应用多刚体动力学理论在 ADAMS 软件中对复杂模型进行简化建模与仿真,解决 复杂模型在 ADAMS 中建模过程繁琐、仿真过程计算效率低等问题。首先对简化建模方法的多 刚体动力学理论进行了分析;然后提出了基于 ADAMS 简化建模的具体方法,着重研究了使原 模型和简化模型中心主转动惯量、中心惯量主轴连体基方向相同的数学方法;最后,将该简化 建模方法应用到过山车单车模型上,并对仿真结果进行对比分析。结果显示基于 ADAMS 的多 刚体动力学简化过山车模型与原模型的仿真效果基本相同。该简化建模方法能有效提高复杂模 型在 ADAMS 中的建模效率和仿真的计算效率。

关 键 词:ADAMS  多刚体动力学  简化建模  运动仿真  过山车

Simplified Modeling and Simulation of Multi Rigid Body Dynamics Based on ADAMS
WANG Kun,XING Hai-jun,XU Meng-chao,ZHANG Lin-hao. Simplified Modeling and Simulation of Multi Rigid Body Dynamics Based on ADAMS[J]. Journal of Graphics, 2019, 40(4): 733. DOI: 10.11996/JG.j.2095-302X.2019040733
Authors:WANG Kun  XING Hai-jun  XU Meng-chao  ZHANG Lin-hao
Affiliation:(School of Mechanical Engineering, Shijiazhuang Tie Dao University, Shijiazhuang Hebei 050043, China)
Abstract:Abstract: In ADAMS software, multi-rigid-body dynamics theory is applied to simplify the modeling and simulation of complex models, which is used to solve the complicated modeling process in ADAMS and the low computational efficiency of the simulation process. Firstly, the multi-rigid body dynamics of the simplified modeling method is analyzed. Then the specific procedure of simplified modeling based on ADAMS is put forward. The present study attaches great importance to a mathematical method that enables the central principal moment of inertia and the principal axis of central inertia of the original model and the simplified model to be of the same orientation. Finally, the simplified modeling method is applied to the roller coaster bicycle model, and the simulation results are compared and analyzed. The simulation results show that the simplified dynamic roller coaster model based on ADAMS is basically the same as the original model. This simplified modeling method can effectively improve the modeling efficiency of complex models in ADAMS and the computational efficiency of simulation.
Keywords:Keywords: ADAMS  multi-rigid body dynamics  simplified modeling  motion simulation  a roller coaster  
本文献已被 万方数据 等数据库收录!
点击此处可从《图学学报》浏览原始摘要信息
点击此处可从《图学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号