| 单浇口注射模热流道加热功率的研究 |
| |
| 引用本文： | 苏娟华 卢根基. 单浇口注射模热流道加热功率的研究[J]. 塑料工业, 1994, 0(6): 22-23,17 |
| |
| 作者姓名： | 苏娟华 卢根基 |
| |
| 作者单位： | 洛阳工学院 471039(苏娟华)，洛阳工学院 471039(卢根基) |
| |
| 摘 要： | 对热容量小，导热损失大的单浇口热流道的加热功率进行了理论计算和试验研究。通过加热功率的测试，为单浇口热道加热功率的理论计算提供了可靠的试验数据。
|
| 关 键 词： | 热流道 加热 功率 注塑成型 模具 塑料 |
A Study of the Heating Power of Single-gate Injection Mold with Hot Runner |
| |
| Su Juanhua La Gengji. A Study of the Heating Power of Single-gate Injection Mold with Hot Runner[J]. China Plastics Industry, 1994, 0(6): 22-23,17 |
| |
| Authors: | Su Juanhua La Gengji |
| |
| Affiliation: | Luoyang Institute of Technology |
| |
| Abstract: | The heating power of single-gate injection mold with hot runner was theoretically calculated and experimentally studied. Reliable experimental data for the theoretical calculation of single-gate injection mold with hot runner were obtained by the determination of the heating power. |
| |
| Keywords: | Hot Runner Heating Power |
| 本文献已被 CNKI 维普 等数据库收录！ |
