| Consteel电弧炉炼钢用碳氧枪水模型冷态试验和应用 |
| |
| 引用本文： | 袁章福,范建峰,李晶,张永利,姬振法,魏彦洪,何春涛.Consteel电弧炉炼钢用碳氧枪水模型冷态试验和应用[J].特殊钢,2005,26(2):9-11. |
| |
| 作者姓名： | 袁章福 范建峰 李晶 张永利 姬振法 魏彦洪 何春涛 |
| |
| 作者单位： | 1、中国科学院过程工程研究所，北京 100080；
2、西宁特殊钢股份有限公司，西宁 810005； |
| |
| 摘 要： | 通过冷态水模型试验 ,改进了西宁特钢引进的Consteel碳氧枪技术 ,确定了喷头倾角25° ,氧枪进入工作位后与炉底水平面保持 35°～ 50°夹角等技术参数。该项改进的技术改善了电弧炉内钢液温度场和流场 ,减少炉底和炉门局部侵蚀 ,加强钢水液面的旋转。应用结果表明 ,每只氧枪炼钢的炉数达到486炉 ,电弧炉炉壳寿命提高28炉 ,每炉钢冶炼时间缩短8 min。
|
| 关 键 词： | Consteel电弧炉 碳氧枪 喷溅模式 水模型冷态模拟 |
| 收稿时间： | 2004-11-01 |
Water Model Cold Simulation Test and Application of Carbon-Oxygen Lance for Steelmaking of Consteel Arc Furnace |
| |
| Yuan Zhangfu,Fan Jianfeng,Li Jing,Zhang Yongli,Ji Zhenfa,Wei Yanhong,He Chuntao.Water Model Cold Simulation Test and Application of Carbon-Oxygen Lance for Steelmaking of Consteel Arc Furnace[J].Special Steel,2005,26(2):9-11. |
| |
| Authors: | Yuan Zhangfu Fan Jianfeng Li Jing Zhang Yongli Ji Zhenfa Wei Yanhong He Chuntao |
| |
| Affiliation: | 1. Institute of Process Engineering,Chinese Academy of Science,Beijing 100080;
2. Xining Special Steel Co.,Ld., Xining 810005; |
| |
| Abstract: | The imported Consteel carbon-oxygen lance technology at Xining Special Steel has been improved by water model cold simulation test to determine the technical parameters -25 degrees slope angle of jet and angle included between lance at service position and a horizontal plane of furnace bottom to maintain 35～50 degrees. The modified technology improved the temperature field and fluid field of liquid steel in arc furnace,decreased the etch of bottom and gate of furnace and intensified the whirl of surface of liquid steel. The application results showed that the heat number of steelmaking by each lance was up to 486 heats,the life of arc furnace wall increased by 28 heats,tap to tap time decreased by 8 min. |
| |
| Keywords: | Consteel Arc Furnace Carbon-Oxygen Lance Spray Mode Water Model Cold Simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
