| 少片变截面钢板弹簧计算机辅助设计方法研究 |
| |
| 引用本文： | 邓水琳,刘夫云,等. 少片变截面钢板弹簧计算机辅助设计方法研究[J]. 装备制造技术, 2014, 0(2): 8-11 |
| |
| 作者姓名： | 邓水琳 刘夫云 等 |
| |
| 作者单位： | 桂林电子科技大学机电工程学院,广西桂林541004 |
| |
| 基金项目： | 国家自然基金资助项目（编号：51265006）;广西制造系统及先进制造技术重点实验室（编号：No.11-031-12_008、No.11-031-12_003） |
| |
| 摘 要： | 针对当前少片变截面钢板弹簧设计、生产的现状,提出了一种少片簧计算机辅助设计方法。首先探讨了少片簧尺寸参数传统设计计算方法;利用Visual C++开发平台对SolidWorks软件进行二次开发,完成了少片簧自动建模系统的开发。最后以某型载货汽车少片簧为例,验证了上述方法的可行性。
|
| 关 键 词： | 少片变截面钢板弹簧 计算方法 自动建模系统 有限元分析 |
Study on Computer Aided Design Method of Taper Leaf Spring |
| |
| DENG Shui-lin,LIU Fu-yun,YANG Meng-jie,WANG Sha-na. Study on Computer Aided Design Method of Taper Leaf Spring[J]. , 2014, 0(2): 8-11 |
| |
| Authors: | DENG Shui-lin LIU Fu-yun YANG Meng-jie WANG Sha-na |
| |
| Affiliation: | ( School of Mechanical ＆ Electrical Engineering, Guilin University of Electronic and Technology, Guilin Guangxi 541004, China ) |
| |
| Abstract: | According to the present situation that taper leaf spring was designed and produced, a computer aided design method to the taper leaf spring was presented. The traditional calculation melhod of design of dimension parameters of taper leaf spring was discussed. Using Visual C＋＋ software development platform and method of the secondary developmen! based on SolidWorks, the automatic modeling system of taper leaf spring was developed. Finally, all proposed methods were applied to the taper leaf spring to a certain type of truck, and the feasibility was also verified. |
| |
| Keywords: | taper leaf spring method of calculation automatic modeling system finite element analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
