首页 | 本学科首页   官方微博 | 高级检索  
     

天然气净化厂贫富胺液换热器腐蚀失效分析
引用本文:段永锋,;苗普,;于凤昌.天然气净化厂贫富胺液换热器腐蚀失效分析[J].石油化工腐蚀与防护,2014(2):61-64.
作者姓名:段永锋  ;苗普  ;于凤昌
作者单位:[1]中石化洛阳工程有限公司,河南洛阳471003; [2]中国石化集团石油化工设备防腐蚀研究中心,河南洛阳471003
基金项目:基金项目:中石化科研项目(308057)资助
摘    要:某天然气净化厂联合装置脱硫单元的贫/富胺液换热器在停工检修期间,发现换热器管箱内堆焊层(材质为316L)存在多处点状腐蚀坑和裂纹。采用外观检查、无损检测、腐蚀产物的能谱分析、X射线衍射分析以及胺液成分定性分析等方法确定了腐蚀发生的原因。研究结果表明,换热器管箱内堆焊层的腐蚀失效主要是由胺液中氯离子(质量分数高达300μg/g)引起奥氏体不锈钢点蚀,粗糙表面和温度进一步加剧腐蚀的发生。根据腐蚀失效产生的原因提出了防护措施。

关 键 词:换热器  不锈钢  点蚀  氯离子

Corrosion Failure Analysis of Lean/Rich Amine Heat Exchanger in Natural Gas Purification Unit
Affiliation:Duan Yongfeng, Miao Pu, Yu Fengchang ( 1. SINOPEC Luoyang Petrochemical Engineering Corporation, Luoyang, Henan 471003 ; 2. SINOPEC Anti -corrosion Research Center of Petrochemical Equipment, Luoyang, Henan 471035)
Abstract:The pitting corrosion and corrosion cracks were found on the 316L weld overlay cladding in the tube channel of lean/ rich amine heat exchanger in the desulfurization unit were analyzed by the spot inspection, nondestructive testing, XRD and EDS of corrosion products as well as qualitative analysis of liquid amine, ete during the overhaul of a natural gas purification plant. The results show that the corrosion failure of 316L weld overlay cladding of tube- channel of lean/rich amine heat exchanger is mainly the pitting corrosion failure caused by chloride ion (300 μg/g) in the amine solution. In addition, the rough surface has accelerated the corrosion. The corresponding protection measures are recommended based on the causes of corrosion failure.
Keywords:heat exchanger  stainless steel  pitting corrosion  chloride ion
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号