| 核电装备制造中落锤试验的影响因素 |
| |
| 引用本文： | 刘钊,朱喜斌,吉宏林,王鑫.核电装备制造中落锤试验的影响因素[J].工程与试验,2011,51(4):34-37. |
| |
| 作者姓名： | 刘钊 朱喜斌 吉宏林 王鑫 |
| |
| 作者单位： | 中广核苏州热工研究院设备监理中心,江苏苏州,215004 |
| |
| 摘 要： | 落锤试验是核电装备制造中对材料进行检测和评判的一种重要方法.本文分析了试样尺寸、试样焊接、过程控制和结果判定四类影响落锤试验的因素,可在今后的试验过程中进行控制,使测试结果达到稳定准确.
|
| 关 键 词： | 落锤试验 ASTM E208 NDT 试样 |
Influencing Factors of Drop-Weight Test for Manufacture of Nuclear Equipment |
| |
| Liu Zhao
,
Zhu Xibin
,
Ji Honglin
,
Wang Xin.Influencing Factors of Drop-Weight Test for Manufacture of Nuclear Equipment[J].ENGINEERING & TEST,2011,51(4):34-37. |
| |
| Authors: | Liu Zhao Zhu Xibin Ji Honglin Wang Xin |
| |
| Affiliation: | (Equipment Supervision Research Center,Suzhou Nuclear Power Research Institute,Suzhou215004,Jiangsu,China) |
| |
| Abstract: | The drop-weight test is an important method for manufacture of nuclear equipment to test and evaluate the material properties.In this paper,four kinds of influencing factors of dropweight test,such as specimen size,specimen weld,process control,result decision,are analyzed.Appropriate control should be done to get the accurate and steady testing results. |
| |
| Keywords: | Drop-weight test ASTM E208 NDT specimen |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
