Poly(vinylidene fluoride)/thermoplastic polyurethane flexible and 3D printable conductive composites |
| |
Authors: | Mayara C Bertolini Sithiprumnea Dul Guilherme M O Barra Alessandro Pegoretti |
| |
Affiliation: | 1. Department of Industrial Engineering, University of Trento, Trento, Italy;2. Department of Mechanical Engineering, Universidade Federal de Santa Catarina, Florianópolis, Brazil |
| |
Abstract: | This work focus on the development of polymeric blends to produce multifunctional materials for 3D printing with enhanced electrical and mechanical properties. In this context, flexible and highly conductive materials comprising poly(vinylidene fluoride)/thermoplastic polyurethane (PVDF/TPU) filled with carbon black-polypyrrole (CB-PPy) were prepared by compression molding, filament extrusion and fused filament fabrication. In order to achieve an optimal compromise between electrical conductivity, mechanical properties and printability, blends composition was optimized and different CB-PPy content were added. Overall, the electrical conductivities of PVDF/TPU 50/50 vol% co-continuous blend were higher than those found for PVDF/TPU 50/50 wt% (i.e., 38/62 vol%) composites at same filler content. PVDF/TPU/CB-PPy 3D printed samples with 6.77 vol% filler fraction presented electrical conductivity of 4.14 S m−1 and elastic modulus, elongation at break and maximum tensile stress of 0.43 GPa, 10.3% and 10.0 MPa, respectively. These results highlight that PVDF/TPU/CB-PPy composites are promising materials for technological applications. |
| |
Keywords: | carbon black co-continuous polymer blends fused filament fabrication polypyrrole |
|
|