Affiliation: | 1. College of Textile and Clothing, Qingdao University, Qingdao, China Key Laboratory of Bio-based Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, China College of Materials Science and Engineering, Shenzhen Key Laboratory of Polymer Science and Technology, Guangdong Research Center for Interfacial Engineering of Functional Materials, Nanshan District Key Lab for Biopolymers and Safety Evaluation and Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen, China These authors contribute equally to this work.;2. Key Laboratory of Bio-based Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, China University of Chinese Academy of Sciences, Beijing, China These authors contribute equally to this work.;3. College of Textile and Clothing, Qingdao University, Qingdao, China These authors contribute equally to this work.;4. College of Textile and Clothing, Qingdao University, Qingdao, China |
Abstract: | Bio-based materials with multifunctional performance are getting immense attention nowadays for their environment friendly and renewable character. Inspired by toughening effect of graphene nanosheets and borate chemistry, a simple in-situ borate crosslinking in water and freeze-drying method was employed to fabricate a fire retarded bio-based aerogel. The structure of the material was evaluated and analysis by SEM, XRD, FTIR, Raman and XPS. Importantly, the bio-based aerogel has improved strength and adsorption properties due to unique structure. The compressive strength of rGO(reduced graphene oxide) + CMC (carboxymethyl cellulose) aerogel could reach 128 ± 2.1 kPa which is five times that of neat CMC aerogel. The bio-based aerogel can load more than 2500 times of self-weight. The adsorption capacity for organic solvents and oil of rGO+CMC aerogel is also greatly improved by a little rGO (1%) introducing due to its unique porous structure and hydrophobic nature of rGO. Additionally, rGO+CMC aerogel is also found fire resistant with relatively low thermal conductivity due to the borate and GO introduction. |